View T240XW01-V1_7755449.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 1 / 25 free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 2 / 25 contents no contents record of revisions 1 general description 2 absolute maximum ratings 3 electrical specification 3-1 electriacl characteristics 3-2 interface connections 3-3 signal timing specification 3-4 signal timing waveforms 3-5 color input data reference 3-6 power sequence for lcd 4 optical specification 5 open cell drawing 6 reliability test items 7 auo?s basic blu optical performance 8 packing 8-1 definition of label 8-2 packing methods 9 precaution 9-1 mounting precautions 9-2 operating precautions 9-3 electrostatic discharge control 9-4 precautions for strong light exposure 9-5 storage 9-6 handling precautions for protect film of polar izer free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 3 / 25 record of revision version date page description 0.0 2010/01/18 first release 0.1 2010/01/20 9 update sellvds information 13 power supply for lcd, vcc +12v power supply for lcd, vcc +5v 0.2 2010/03/05 6 update electric characteristic 13 update power sequence of lcd 20 update auo?s basic blu optical performance 8 update lvds pin assignment information 9 update lvds drawing 17.18 update skd drawing 19 update drop test regulation 0.3 2010/04/06 13 update power sequence of lcd (t2 max=50ms) free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 4 / 25 1. general description this specification applies to the 24 inch color tft -lcd skd t240xw01 v1. this lcd open cell unit has a tft active matrix type liquid crystal panel 1,366x7 68 pixels, and diagonal size of 24.02 inch. this mo dule supports 1,366x768 mode. each pixel is divided into red, gre en and blue sub-pixels or dots which are arranged i n horizontal stripes. gray scale or the brightness of the sub-pixel color is determined with a 8-bit gra y scale signal for each dot. the t240xw01 v1 has been designed to apply the 8-bi t and 1 channel lvds interface method. it is intend ed to support displays where high brightness, wide viewin g angle, high color saturation, and high color dept h are very important. * general information item specification unit note active screen size 24.02 [ inch ] - display area 531.7155 (h) x 298.944 (v) [ mm ] - outline dimension 546.80 (h) x 314.10 (v) x 1.8 (d) [ mm ] resolution 1,366 x 768 [ pixel ] - pixel pitch 0.38925 [ mm ] - pixel arrangement rgb horizontal stripe - - display mode normally black - - display colors 16.7m (8-bit for r,g,b) [ color ] - surface treatment ag, haze=11%, 3h - - free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 5 / 25 2. absolute maximum ratings the followings are maximum values which, if exceede d, may cause faulty operation or damage to the unit item symbol min max unit note logic/lcd drive voltage vdd -0.3 6 [ volt ] 1 input voltage of signal vin -0.3 4 [ volt ] 1 operating temperature top 0 +50 [ o c ] 2 operating humidity hop 10 90 [ %rh ] 2 storage temperature tst -20 +60 [ o c ] 2 storage humidity hst 10 90 [ %rh ] 2 panel surface temperature pst 65 [ o c ] 3 note 1: duration: 50 msec. note 2: maximum wet-bulb should be 39 and no conden sation. the relative humidity must not exceed 90% non-conde nsing at temperatures of 40 or less. at temperature s greater than 40 , the wet bulb temperature must not exceed 39 . note 3: surface temperature is measured at 50 dry condition free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 6 / 25 3. electrical specification the t240xw01 v1 requires two power inputs. one is e mployed to power the lcd electronics and to drive t he tft array and liquid crystal. the second input for blu is to power inverter. 3.1 electrical characteristics value parameter symbol min. typ. max unit note lcd power supply input voltage v dd 4.5 5 5.5 v dc 1 power supply input current i dd -- 0.65 0.8 a 2 power consumption p c -- 3.25 4.0 watt 2 inrush current i rush -- -- 3 a 3 input differential voltage O v id O 200 400 600 mv dc 4 differential input high threshold voltage v th -- -- +100 mv dc 4 differential input low threshold voltage v tl -100 -- -- mv dc 4 lvds interface input common mode voltage v icm 1.1 1.25 1.4 v dc 4 input high threshold voltage v ih (high) 2.7 -- 3.3 v dc cmos interface input low threshold voltage v il (low) 0 -- 0.6 v dc note : 1. the ripple voltage should be controlled under 10% o f v cc 2. v dd = 5.0v, fv=60hz, f clk = 82mhz , 25 , test pattern : white pattern 3. measurement condition : rising time = 400us gnd gnd gnd gnd v vv v dd dddd dd 10% 90% 400 400400 400 s free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 7 / 25 4. v icm = 1.25v v vv v th thth th v vv v icm icmicm icm v vv v tl tltl tl 0 00 0v vv v | || |v vv v id idid id | || | free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 8 / 25 3.2 interface connections lcd connector (cn1): starcon 106f30_000000_a2_r pin symbol description 1 reserved auo internal use only 2 reserved auo internal use only 3 reserved auo internal use only 4 gnd ground 5 ch1_0- lvds channel, signal 0- 6 ch1_0+ lvds channel, signal 0+ 7 gnd ground 8 ch1_1- lvds channel, signal 1- 9 ch1_1+ lvds channel, signal 1+ 10 gnd ground 11 ch1_2- lvds channel, signal 2- 12 ch1_2+ lvds channel, signal 2+ 13 gnd ground 14 ch1_clk- lvds channel, clock - 15 ch1_clk+ lvds channel, clock + 16 gnd ground 17 ch1_3- lvds channel, signal 3- 18 ch1_3+ lvds channel, signal 3+ 19 gnd ground 20 nc no connection 21 lvds_sel open/high(3.3v) for ns, low(gnd) for jeida 22 nc no connection 23 gnd ground 24 gnd ground 25 gnd ground 26 v dd power supply, +5v dc regulated 27 v dd power supply, +5v dc regulated 28 v dd power supply, +5v dc regulated 29 v dd power supply, +5v dc regulated 30 v dd power supply, +5v dc regulated note 1. all gnd (ground) pins should be connected togeth er and should also be connected to the lcd?s metal frame. 2. all vcc (power input) pins should be connected t ogether. free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 9 / 25 lvds option = high/open ns b bb b 2 22 2 n a n an a n a d e d ed e d e d e d ed e d e b bb b 2 22 2 b bb b 3 33 3 b bb b 4 44 4 b bb b 5 55 5 n a n an a n a b bb b 3 33 3 r rr r 0 00 0 r rr r 5 55 5 g gg g 0 00 0 g gg g 0 00 0 r rr r 0 00 0 r rr r 1 11 1 r rr r 2 22 2 r rr r 3 33 3 r rr r 4 44 4 r rr r 1 11 1 g gg g 1 11 1 b bb b 0 00 0 b bb b 1 11 1 b bb b 1 11 1 g gg g 1 11 1 g gg g 2 22 2 g gg g 3 33 3 g gg g 4 44 4 g gg g 5 55 5 g gg g 2 22 2 c lo ck c lo ck c lo ck c lo ck c h x c h x c h x c h x _ __ _ 0 00 0 + ++ + c h x c h x c h x c h x _ __ _ 0 00 0 - -- - c h x c h x c h x c h x _ __ _ 1 11 1 + ++ + c h x c h x c h x c h x _ __ _ 1 11 1 - -- - c h x c h x c h x c h x _ __ _ 2 22 2 + ++ + c h x c h x c h x c h x _ __ _ 2 22 2 - -- - c h x c h x c h x c h x _ __ _ 3 33 3 + ++ + c h x c h x c h x c h x _ __ _ 3 33 3 - -- - r rr r 6 66 6 b bb b 7 77 7 n a n an a n a n a n an a n a r rr r 6 66 6 r rr r 7 77 7 g gg g 6 66 6 g gg g 7 77 7 b bb b 6 66 6 r rr r 7 77 7 p re vio u s c y cle c u rre n t c yc le n e xt c yc le p re vio u s c y cle c u rre n t c yc le n e xt c yc le p re vio u s c y cle c u rre n t c yc le n e xt c yc le p re vio u s c y cle c u rre n t c yc le n e xt c yc le note: x = 1, 2, 3, 4? lvds option = low jeida b bb b 4 44 4 n a n an a n a d e d ed e d e d e d ed e d e b bb b 4 44 4 b bb b 5 55 5 b bb b 6 66 6 b bb b 7 77 7 n a n an a n a b bb b 5 55 5 r rr r 2 22 2 r rr r 7 77 7 g gg g 2 22 2 g gg g 2 22 2 r rr r 2 22 2 r rr r 3 33 3 r rr r 4 44 4 r rr r 5 55 5 r rr r 6 66 6 r rr r 3 33 3 g gg g 3 33 3 b bb b 2 22 2 b bb b 3 33 3 b bb b 3 33 3 g gg g 3 33 3 g gg g 4 44 4 g gg g 5 55 5 g gg g 6 66 6 g gg g 7 77 7 g gg g 4 44 4 c lo ck c lo ck c lo ck c lo ck r rr r 0 00 0 b bb b 1 11 1 n a n an a n a n a n an a n a r rr r 0 00 0 r rr r 1 11 1 g gg g 0 00 0 g gg g 1 11 1 b bb b 0 00 0 r rr r 1 11 1 c h x c h x c h x c h x _ __ _ 0 00 0 + ++ + c h x c h x c h x c h x _ __ _ 0 00 0 - -- - c h x c h x c h x c h x _ __ _ 1 11 1 + ++ + c h x c h x c h x c h x _ __ _ 1 11 1 - -- - c h x c h x c h x c h x _ __ _ 2 22 2 + ++ + c h x c h x c h x c h x _ __ _ 2 22 2 - -- - c h x c h x c h x c h x _ __ _ 3 33 3 + ++ + c h x c h x c h x c h x _ __ _ 3 33 3 - -- - p re vio u s c yc le c u rre n t c ycle n e x t c ycle p re vio u s c yc le c u rre n t c ycle n e x t c ycle p re vio u s c yc le c u rre n t c ycle n e x t c ycle p re vio u s c yc le c u rre n t c ycle n e x t c ycle note: x = 1, 2, 3, 4? free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 10 / 25 3.3 signal timing specification this is the signal timing required at the input of the user connector. all of the interface signal tim ing should be satisfied with the following specifications for its proper operation. signal item symbol min. typ. max unit period tv 784 810 1,015 [ th ] active tdisp (v) 768 [ th ] vertical section blanking tblk (v) 16 42 247 [ th ] period th 1,460 1,648 2,000 [ tclk ] active tdisp (h) 1,366 [ tclk ] horizontal section blanking tblk (h) 94 282 634 [ tclk ] clock frequency fclk=1/tclk 50 80 86 [ mhz ] vertical frequency frequency fv 47 60 63 [ hz ] horizontal frequency frequency fh 43 48 53 [ khz ] notes: (1) display position is specific by the rise of de signal only. horizontal display position is specified by the ris ing edge of 1 st dclk after the rise of 1 st de, is displayed on the left edge of the screen. (2) vertical display position is specified by the r ise of de after a ?low? level period equivalent to eight times of horizontal period. the 1 st data corresponding to one horizontal line after th e rise of 1 st de is displayed at the top line of screen. (3) if a period of de ?high? is less than 1366 dclk or less than 768 lines, the rest of the screen dis plays black. (4) the display position does not fit to the screen if a period of de ?high? and the effective data pe riod do not synchronize with each other. free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 11 / 25 3.4 signal timing waveforms free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 12 / 25 3.5 color input data reference the brightness of each primary color (red, green an d blue) is based on the 8 bit gray scale data input for the color; the higher the binary input, the brighter the color . the table below provides a reference for color ve rsus data input. color data reference input color data red msb lsb green msb lsb blue msb lsb color r7 r6 r5 r4 r3 r2 r1 r0 g7 g6 g5 g4 g3 g2 g1 g0 b7 b6 b5 b4 b3 b2 b1 b0 black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 basic color white 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 red(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 red(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ---- red(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 r red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 green(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 ---- green(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 g green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 blue(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 ---- blue(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 b blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 13 / 25 3.6 power sequence for lcd values parameter min. typ. max. unit t1 0.4 - 30 [ ms ] t2 0.1 - 50 [ ms ] t3 200 - - [ ms ] t4 0 *1 - - [ ms ] t5 0 - - [ ms ] t6 - - - *2 [ ms ] t7 500 - - [ ms ] note: (1) t4=0 : concern for residual pattern before blu turn off. (2) t6 : voltage of vdd must decay smoothly after p ower-off. (customer system decide this value) apply the lamp voltage within the lcd operating ran ge. when the backlight turns on before the lcd oper ation or the lcd turns off before the backlight turns off, t he display may momentarily become abnormal. caution: the above on/off sequence should be applied to avo id abnormal function in the display. in case of handling, make sure to turn off the power when you plug the cable into the input connector or pull the cable out of the connector. +5v free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 14 / 25 4. optical specification optical characteristics are determined after the un it has been ?on? and stable for approximately 45 mi nutes in a dark environment at 25c. the values specified are at an approximate distance 50cm from the lcd surfac e at a viewing angle of and equal to 0. fig.1 presents additional information concerning th e measurement equipment and method. values parameter symbol min. typ. max unit notes contrast ratio cr 1600 2,000 - - 1, 2 surface luminance (white) l wh 240 300 - [ cd/ O ] 1, 3 luminance variation white(9p) - - 1.3 - 1, 4 cell transparency tr 4.3 % 1, 7 response time (g to g) t - 8 - [ ms ] 1, 5 color gamut ntsc - 72 - [ % ] 1 color coordinates red r x 0.64 1 r y 0.33 1 green g x 0.29 1 g y 0.60 1 blue b x 0.15 1 b y 0.06 1 white w x 0.29 1 w y typ.-0.03 0.30 typ.+0.03 1 viewing angle x axis, right( =0) r -- 89 -- degree 6 x axis, left( =180) l -- 89 -- degree 6 y axis, up( =90) u -- 89 -- degree 6 y axis, down ( =270) d -- 89 -- degree 6 sr3 or equivalent free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 15 / 25 note: 1. the measured optical data is based on auo blu u nit. 2. contrast ratio (cr) is defined mathematically a s: surface luminance of l on5 contrast ratio= surface luminance of l off5 3. surface luminance is luminance value at point 5 across the lcd surface 50cm from the surface with all pixels displaying white. from more information see fig 2. when lamp current i h = 11ma. l wh =lon5 where lon5 is the luminance with all pixels displaying white at c enter 5 location. 4. the variation in surface luminance, white is defined (center of screen) as: white(9p) = maximum(l on1 , l on2 ,?,l on9 )/ minimum(l on1 , l on2 ,?l on9 ) 5. response time t is the average time required for display transition by switching the input signal for five luminance ratio (0%,25%,50%,75%,100% brightness mat rix) and is based on f v =60hz to optimize. target measured response time 0% 25% 50% 75% 100% 0% 0% to 25% 0% to 50% 0% to 75% 0% to 100% 25% 25% to 0% 25% to 50% 25% to 75% 25% to 100% 50% 50% to 0% 50% to 25% 50% to 75% 50% to 100% 75% 75% to 0% 75% to 25% 75% to 50% 75% to 100% start 100% 100% to 0% 100% to 25% 100% to 50% 100% to 75% 6. viewing angle is the angle at which the contrast ratio is greater than 10. the angles are determine d for the horizontal or x axis and the vertical or y axis wit h respect to the z axis which is normal to the lcd surface. for more information see fig3. 7. cell transparency ( tr ) is the ratio of module luminance at center point of active area to backlig ht luminance at center point. tr is defined as, tr (%) = ( module l uminance / backlight luminance ) x 100. where the f ilm structure of backlight should not include any refle ctive type of prism such as dbefd, and measurement of module or backlight luminance should be under the s ame condition of blu power and no any lamp mura is found. fig. 2 luminance 1 2 3 4 5 6 7 8 h v h/6 h/2 v/2 v/6 free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 16 / 25 fig.3 viewing angle free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 17 / 25 5. open cell drawing free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 18 / 25 free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 19 / 25 6. reliability test items test item q?ty condition 1 high temperature storage test 3 60 , 300hrs 2 low temperature storage test 3 -20 , 300hrs 3 high temperature operation test 3 50 , 300hrs 4 low temperature operation test 3 -5 , 300hrs 7 vibration test (with carton) 24 random wave (1.5g rms, 10-200hz) 30mins/ per each x,y,z axes 8 drop test (with carton) 24 height: 45.7 cm 1 corner, 3 edges, 6 surfaces (astmd5276) note: test item 1~4test item 1~4 ra tests are done on auo 97.24t01.100 panels. free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 20 / 25 7. auo?s basic blu optical performance the center luminance & chromaticity of auo?s blu item typ. unit note luminance 6900 nit 100% dimming item min typ max wx 0.252 0.267 0.282 central chromaticity (cie 1930) wy 0.236 0.251 0.266 free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 21 / 25 8. packing 8.1 definition of label: a. open cell shipping label: (1) auo internal code (2) manufactured date (3) model name b. carton label: t240xw01 v t240xw01 v t240xw01 v t240xw01 v1 11 1 (1) (2) (3) free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 22 / 25 8.2 packing methods: (a) (b) (c) (d) (e) (f) free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 23 / 25 (g) (h) (i) carton : 720(l)mm*520(w)mm*290(h)mm pallet : 1070mm*740mm*132mm (1) by air: (2*1) *3 layers, 6boxes per palle t, total 144pcs open cell per pallet (2) by sea: (2*1) *3 layers, 6boxes per palle t, double pallets, total 288pcs open cell per palle t free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 24 / 25 9. precautions please pay attention to the followings when you use this tft lcd open cell unit. 9-1 mounting precautions (1) you should consider the mounting structure so t hat uneven force (ex. twisted stress) is not applie d to the cell. and the frame on which a cell is mounted shou ld have sufficient strength so that external force is not transmitted directly to the cell. (2) please attach the surface transparent protectiv e plate to the surface in order to protect the pola rizer. transparent protective plate should have sufficient strength in order to the resist external force. (3) you should adopt radiation structure to satisfy the temperature specification. (4) acetic acid type and chlorine type materials fo r the cover case are not desirable because the form er generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit b reak by electro-chemical reaction. (5) do not touch, push or rub the exposed polarizer s with glass, tweezers or anything harder than hb p encil lead. and please do not rub with dust clothes with chemical treatment. do not touch the surface of pol arizer for bare hand or greasy cloth. (some cosmetics are detrimental to the polarizer.) (6) when the surface becomes dusty, please wipe gen tly with absorbent cotton or other soft materials l ike chamois soaks with petroleum benzene. normal-hexane is recommended for cleaning the adhesives used to attach front/ rear polarizers. do not use aceton e, toluene and alcohol because they cause chemical damage to the polarizer. (7) wipe off saliva or water drops as soon as possi ble. their long time contact with polarizer causes deformations and color fading. (8) do not open the case because inside circuits do not have sufficient strength. 9-2 operating precautions (1) the open cell unit listed in the product specif ication sheets was designed and manufactured for tv application (2) the spike noise causes the mis-operation of cir cuits. it should be lower than following voltage: v=200mv(over and under shoot voltage) (3) response time depends on the temperature. (in l ower temperature, it becomes longer.) (4) brightness depends on the temperature. (in lowe r temperature, it becomes lower.) and in lower temperature, response time (required time that brig htness is stable after turned on) becomes longer. (5) be careful for condensation at sudden temperatu re change. condensation makes damage to polarizer or electrical contacted parts. and after fading con densation, smear or spot will occur. (6) when fixed patterns are displayed for a long ti me, remnant image is likely to occur. (7) module has high frequency circuits. sufficient suppression to the electromagnetic interference sha ll be done by system manufacturers. grounding and shieldi ng methods may be important to minimize the interface. 9-3 electrostatic discharge control since a open cell unit is composed of electronic ci rcuits, it is not strong to electrostatic discharge . make certain that treatment persons are connected to ground through w rist band etc. and don?t touch interface pin direct ly. free datasheet http://
t240xw01 v1 product specification rev. 03 ? copyright auo optronics corp. 2009 all rights res erved. page 25 / 25 9-4 precautions for strong light exposure strong light exposure causes degradation of polariz er and color filter. 9-5 storage when storing open cell units as spares for a long t ime, the following precautions are necessary. (1) store them in a dark place. do not expose the o pen cell unit to sunlight or fluorescent light. kee p the temperature between 5 and 35 at normal humidity. (2) the polarizer surface should not come in contac t with any other object. it is recommended that the y be stored in the container in which they were shipped. 9-6 handling precautions for protection film of pol arizer the protection film of polarizer is still attached on the surface as you receive open cell units. when the protection film is peeled off, static electricity is easily ge nerated on the polarizer surface. this should be pe eled off slowly and carefully by people who are electrically grounded a nd with well ion-blown equipment or in such a condi tion, etc. free datasheet http://

▲Up To Search▲

Price & Availability of T240XW01-V1

	To Download T240XW01-V1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .